Unit management

Add a unit

1. Connect the Aidoo

You must have Bluetooth and location enabled on your iOS or Android device in order to add the unit, and the device must be near the Aidoo.

In the drop-down menu, tap the option Add device.
Select the unit from the list of available units that you wish to add to obtain information.

If your unit does not appear, confirm that the Bluetooth function on your iOS or Android device is enabled, and that the Aidoo is on and working correctly.
If necessary, enter the PIN code located on the Aidoo.
You can run test actions to identify and check the correct operation of your unit (heat, cool, fan and turn off).
For Modbus installations, indicate the Modbus port that should be targeted.

2. Connect unit to the network

After verifying that the Aidoo is correctly connected, continue with the Wi-Fi network pairing by tapping Yes.
Select the network you wish to connect to.
Enter the password and tap Send; then continue the process by tapping Yes.

3. Add unit to a group

Select the group to which the unit will belong.
Enter the name of the zone and tap Finish.

If the group to which you wish to associate the unit does not exist, tap Add new group and set the name and image of the group, as well as the temperature unit.

Add unit - new group

4. Move unit to another group

If a unit has already been added and you want to release it to be added by another user, you must first delete that unit. Follow the steps described in the Delete unit/zone section and configure your unit again as described in this section.